Vaping is supposed to taste good – and if you’ve tried vaping and didn’t enjoy the flavor, this article is for you. Although vaping devices have become increasingly user-friendly over the years and can usually be counted on to work perfectly with little or no special effort on your part, there are some people out there who tried vaping once, had a bad first experience and never tried it again. We don’t want that to happen to you. As reliable as today’s vaping devices from companies like buyv2cigs.co.uk are, it’s still possible to make a mistake that results in a persistent burned flavor when you vape. In this article, we’ll explain how to avoid those mistakes and ensure that your vaping device always produces the best possible flavor.
Contents
Prime Your New Coils and Wait Before Using Them
If you’ve ever had a vaping device that produced a burned flavor from the very first puff – and the burned flavor remained consistent as you continued to use the device – it’s likely that the atomizer coil in the device’s tank or pod had a burned wick. Most atomizer coils have cotton wicks. Cotton is a popular wick material for vaping because it’s inexpensive and produces a good flavor. Cotton does have one shortcoming, though, in that it can burn if it is dry – and that produces a burned flavor that can ruin your vaping experience.
Priming a new coil before installing it is the first step in ensuring that you will not burn the coil’s wick when you vape. When you examine a vape coil, you’ll see holes on the side. Through those holes – and through the coil’s top opening – you’ll see the cotton wick. To prime the coil, place a little e-liquid on each of the holes and send a bit of juice down the coil’s top opening as well. If the wick still looks dry, add a little more e-liquid until the entire wick looks damp. After installing the coil and filling the tank, wait several minutes before vaping. At that point, the wick should be completely saturated with e-liquid, and there should be no risk of burning the wick with your first puff.
Vape at a Moderate Wattage Level
Every vape coil has a wattage range in which it is designed to operate. You’ll see the wattage range etched into the coil’s casing, and you’ll usually see it printed on the coil’s packaging as well. The suggested wattage range is a guideline that’s there to help prevent you from burning the wick. If you have an adjustable vaping device, make sure that the wattage setting is within the coil’s suggested range.
Adjust Your Device’s Wattage to Compensate for Longer Puffs
One of the most important things to know about your atomizer coil’s suggested wattage range is that manufacturers calibrate their suggested wattage ranges for an average puff length of about 2-3 seconds. If you vape with short puffs, you shouldn’t experience a problem if you vape anywhere within your atomizer coil’s suggested range. If your typical puff length is longer than three seconds, though, you may need to adjust your device’s wattage to compensate for that. Consider vaping at the low end of your coil’s suggested range – or even slightly below that range. Otherwise, your coil’s wick may be dry at the end of those long puffs – and that’s what leads to burning.
Refill Your Tank or Pod Before It’s Empty
In case you haven’t realized it by now, the key to avoiding a burned flavor when you vape is ensuring that your coil is never fired when the wick is dry. Along with priming your coil properly and always vaping at a reasonable wattage level, it’s important to always keep your tank or pod full. When you primed your coil, you saw the wick openings on the side. When you examine your tank, you’ll probably see that the wick openings aren’t quite level with the bottom of the tank. When the level of e-liquid in the tank is low, the e-liquid isn’t covering those openings – and that means the wick isn’t working as efficiently as it can. Don’t try to use your tank until it is completely empty; refill the tank as soon as you notice that the supply of e-liquid is starting to get low.
Avoid Sweetened E-Liquid to Maximize Your Coil Life
There are two common causes of a burned flavor when you vape. The first cause is a burned wick, and that’s what this article has discussed so far. The second cause, however, is a buildup on the atomizer coil that the vaping community has named “coil gunk.” Coil gunk is the residue that’s left behind when the ingredients in your e-liquid don’t vaporize cleanly. Almost all e-liquid flavors leave at least a little residue on the coil, but the biggest offender by far is the sweetener sucralose. If you have an e-liquid that tastes almost as sweet as sugar, there’s a good chance that sucralose is one of its ingredients. Sucralose tastes great, but the residue that it leaves behind will cause your atomizer coil to produce a burned flavor after just a couple of days if you’re a frequent vaper. If you want your coils to last longer before their flavor quality declines, you should avoid sweetened e-liquid.
Learn How to Find Out Why Your Vape Tastes Burned
If you follow all of the steps in this article, you should almost never have to deal with a burned flavor when you vape. Before you follow the steps, though, you need to know why your vape tastes burned in the first place. To determine that, remove the coil from your tank and examine it when you start to notice a burned flavor. If the coil’s heating surface is still white, you probably have a burned wick. If the heating surface looks dark and sticky, you have coil gunk. Every vape coil dies eventually, and unless you’re using e-liquid that has no flavor at all, you’re going to see residue on your coil after you’ve been using it for a while. As mentioned above, you can extend the life of your coils by using unsweetened e-liquid. Otherwise, there isn’t much that you can do – apart from using unflavored e-liquid – to prevent coil gunk, and you’ll simply have to replace the coil when you no longer enjoy its flavor.